Elaboración, caracterización y optimización de técnicas de deposición de contactos metálicos en sensores solares para aplicaciones espaciales
Development, characterization and optimization of metal contact deposition techniques in solar sensors for space applications
Cargando...
Fecha
Tipo de recurso
TESIS DE MAESTRIA
Autor / Creador principal
Responsable institucional (informe)
Compilador
Diseñador
Contacto (informe)
Promotor
Titular
Inventor
Tutor de tesis
Solicitante
Afiliación
Fil.: Cuzal Toc, Rodrigo Alexánder. Comisión Nacional de Energía Atómica. Instituto Sabato; Argentina
Sede CNEA
Centro Atómico Constituyentes
Fecha de publicación
Fecha de creación
2022
Idioma
spa
Nivel de accesibilidad
Condiciones de uso
https://creativecommons.org/licenses/by-nc-sa/4.0/
Versión
info:eu-repo/semantics/publishedVersion
Identificador CNEA
ITS/TM 221/22
TM-ITS_EA-2022cuzaltoc
TM-ITS_EA-2022cuzaltoc
Identificador (documentos oficiales)
ISBN
ISSN
Cobertura espacial
Cobertura temporal
Materia INIS
ENERGIA SOLAR
RADIACION SOLAR
SENSORES SOLARES
SENSORES ESPACIALES
TRATAMIENTOS TERMICOS
CELULAS FOTOVOLTAICAS
MATERIALES SEMICONDUCTORES
SILICIO
DIFUSION
CONTACTOS ELECTRICOS
SOLAR ENERGY
SOLAR RADIATION
SOLAR SENSORS
SPACE SENSORS
HEAT TREATMENTS
PHOTOVOLTAIC CELLS
SEMICONDUCTOR MATERIALS
SILICON
DIFFUSION
LECTRIC CONTACTS
RADIACION SOLAR
SENSORES SOLARES
SENSORES ESPACIALES
TRATAMIENTOS TERMICOS
CELULAS FOTOVOLTAICAS
MATERIALES SEMICONDUCTORES
SILICIO
DIFUSION
CONTACTOS ELECTRICOS
SOLAR ENERGY
SOLAR RADIATION
SOLAR SENSORS
SPACE SENSORS
HEAT TREATMENTS
PHOTOVOLTAIC CELLS
SEMICONDUCTOR MATERIALS
SILICON
DIFFUSION
LECTRIC CONTACTS
Palabras clave
SENSORES SOLARES
CONTACTOS METALICOS
APLICACIONES ESPACIALES
SOLAR SENSORS
METAL CONTACTS
SPACE APPLICATIONS
CONTACTOS METALICOS
APLICACIONES ESPACIALES
SOLAR SENSORS
METAL CONTACTS
SPACE APPLICATIONS
Macro-area temática
Formato (extensión)
71 p.
Editor
Comisión Nacional de Energía Atómica. Gerencia Área Académica. Gerencia Instituto Sabato
Universidad Nacional San Martin. Instituto de tecnología Sabato
Universidad Nacional San Martin. Instituto de tecnología Sabato
Es parte de
Es parte la serie
Agrupamiento documental - Sección
Agrupamiento documental - Serie
Evaluación académica
Institución académica
Universidad Nacional San Martin. Instituto de Tecnología Sabato
Titulación
Magister en Cienica y Tecnología de Materiales
Fecha de resolución
Fecha de presentación de solicitud
Resolución
Estado
Prioridad - fecha
Estado de licenciamiento
Nº de prioridad
Nº de patente
Nº de solicitud
País de registro
Nivel de madurez de la tecnología
Campo de aplicación
Campo de desarrollo
Resumen
Desde la década de los 90, el Departamento de Energía Solar (DES) de la Comisión Nacional de Energía Atómica (CNEA) investiga y desarrolla sensores de radiación solar con aplicaciones para usos terrestres y espaciales. Durante el trabajo de esta Tesis, se fabricaron un conjunto de sensores de silicio cristalino que presentaron problemas de adherencia en los contactos metálicos. Con el objetivo de resolver el problema presentado se realizaron mejoras en el equipo de electrodeposición de plata, modificando el sistema de sujeción de varillas de acero inoxidable y mecanizando nuevos soportes del sistema de fijación. Además, se realizó un análisis por microscopía electrónica de barrido de los sensores descartados con el objetivo de encontrar impurezas no deseadas en la interfaz metal semiconductor. Los resultados del análisis de las muestras examinadas no presentaron contaminantes. Finalmente, con las modificaciones implementadas se elaboraron y caracterización eléctrica y electrónicamente un nuevo conjunto de sensores que no presentan problemas de adherencia en los contactos metálicos seguidamente del proceso de engrosado y posterior al tratamiento térmico y mostraron parámetros eléctricos acordes a las especificaciones de diseño del sensor.
Since the 1990s, the Department of Solar Energy (DES) of the National Atomic Energy Commission (CNEA) has been researching and developing solar radiation sensors with applications for terrestrial and space uses. During the work of this Thesis, a set of crystalline silicon sensors were manufactured that presented adhesion problems in the metallic contacts. With the aim of solving the problem presented, improvements were made to the silver electrodeposition equipment, modifying the stainless steel rod fastening system and machining new supports for the fastening system. In addition, a scanning electron microscopy analysis of the discarded sensors was carried out with the aim of finding unwanted impurities at the metal-semiconductor interface. The results of the analysis of the samples examined did not show any contaminants. Finally, with the implemented modifications, a new set of sensors were developed and electrically and electronically characterized that did not present adhesion problems on the metal contacts following the thickening process and after the heat treatment and showed electrical parameters in accordance with the sensor design specifications. .
Since the 1990s, the Department of Solar Energy (DES) of the National Atomic Energy Commission (CNEA) has been researching and developing solar radiation sensors with applications for terrestrial and space uses. During the work of this Thesis, a set of crystalline silicon sensors were manufactured that presented adhesion problems in the metallic contacts. With the aim of solving the problem presented, improvements were made to the silver electrodeposition equipment, modifying the stainless steel rod fastening system and machining new supports for the fastening system. In addition, a scanning electron microscopy analysis of the discarded sensors was carried out with the aim of finding unwanted impurities at the metal-semiconductor interface. The results of the analysis of the samples examined did not show any contaminants. Finally, with the implemented modifications, a new set of sensors were developed and electrically and electronically characterized that did not present adhesion problems on the metal contacts following the thickening process and after the heat treatment and showed electrical parameters in accordance with the sensor design specifications. .