Publicación: Efecto de la zona afectada térmicamente en proceso de soldadura en la fatiga de bajo ciclo de aceros estructurales. I. Fatiga de bajo números de ciclos
Cargando...
Archivos
Fecha
Tipo de recurso
PRESENTACIÓN A EVENTO
Autores
Responsable institucional (informe)
Compilador
Diseñador
Contacto (informe)
Promotor
Productor
Titular
Inventor
Tutor de tesis
Solicitante
Afiliación
Fil.: Crespi, Juan Carlos Comisión Nacional de Energía Atómica; Argentina
Di Bella, D. A. Comisión Nacional de Energía Atómica; Argentina
Sede CNEA
Fecha de publicación
Fecha de creación
Idioma
spa
Nivel de accesibilidad
Resumen
El objetivo del presente trabajo ha sido el estudio del efecto de la zona afectada térmicamente (ZAT) sobre las propiedades de fatiga de bajo número de ciclos en aceros estructurales del tipo A508 clase2 y 22NiMoCr37. Para ello se han relacionado las propiedades cíclicas de la microestructura de la ZAT y la del material base, este último en condiciones de templado y revenido. La microestructura de la ZAT se reprodujo convenientemente con un tratamiento de simulación. Se ha concluido que el ciclo térmico introducido por la soldadura deteriora la estructura de la región afectada. Consecuentemente se demuestra la perdida de propiedades monotónicas y cíclicas. Finalmente se ha tratado de determinar en estos materiales los micromecanismos operativos de los fenómenos inherentes a la fatiga de bajo número de ciclos.
The main objective of this investigation has been the study of the influence of the Heat Affected Zone (HAZ) on low cycle fatigue properties of structural steels, type A508 class2 and 22NiMoCr37. Within this purpose, it has been related the cyclic properties of HAZ with the corresponding of the material microstructures, the last under quenched and tempered conditions. HAZ microstructures have been reproduced by properly simulated heat treatments. The thermal cycle introduced by welding process modified the structure of the affected region. Consequently, the loss of monotonic and cyclic ductile properties has been shown. Finally, the operative micromechanisms of the low cycle fatigue phenomena have been suggested. Research is in progress about the microstructural and electromicrofractographical analysis and a final report will be given.
The main objective of this investigation has been the study of the influence of the Heat Affected Zone (HAZ) on low cycle fatigue properties of structural steels, type A508 class2 and 22NiMoCr37. Within this purpose, it has been related the cyclic properties of HAZ with the corresponding of the material microstructures, the last under quenched and tempered conditions. HAZ microstructures have been reproduced by properly simulated heat treatments. The thermal cycle introduced by welding process modified the structure of the affected region. Consequently, the loss of monotonic and cyclic ductile properties has been shown. Finally, the operative micromechanisms of the low cycle fatigue phenomena have been suggested. Research is in progress about the microstructural and electromicrofractographical analysis and a final report will be given.