Publicación:
Medición de propiedades mecánicas dinámicas. Ensayo de tracción, ensayo de fractura, KIC y/o JIC

Measurement of dynamic mechanical properties. Tensile test, fracture test, KIC and/or JIC
Cargando...
Miniatura

Fecha

Tipo de recurso

TESIS DE MAESTRÍA

Responsable institucional (informe)

Compilador

Diseñador

Contacto (informe)

Promotor

Productor

Titular

Inventor

Solicitante

Afiliación

Comisión Nacional de Energía Atómica. Instituto de Tecnología Sabato

Sede CNEA

Fecha de publicación

Fecha de creación

Idioma

spa

Nivel de accesibilidad

Proyectos de investigación

Unidades organizativas

Número de la revista

Resumen

Tesis para optar al título de Magister en Ciencia y Tecnología de Materiales
En este trabajo se resume la investigación que se llevó a cabo para la determinación del comportamiento de las propiedades mecánicas en condiciones dinámicas del material proveniente de un Tubo de Presión de Centrales Tipo CANDU. Incluye la preparación, previo diseño y fabricación de los dispositivos requeridos para los ensayos, de las probetas de tracción y compactas pre-fisuradas por fatiga, a ser ensayadas. Para la obtención de las propiedades dinámicas se empleó un péndulo de impacto, el que se instrumentó equipándolo con una celda de carga y un sistema de adquisición de datos. De este dispositivo se obtuvieron los registros carga-desplazamiento, que luego fueron utilizados para la determinación de las propiedades dinámicas del material, tanto de tracción como de fractura. La relación del crecimiento estable de la fisura asociada al valor de J se determinó a partir del Método desarrollado en CNEA.|This paper summarizes the research carried out for determining the mechanical properties under dynamic conditions of the material from a CANDU type reactor's Pressure Tube. Includes the preparation, prior design and manufacturing of the devices required for testing of tensile and fatigue pre-cracked compact specimens to be tested. To obtain the dynamic properties, an impact pendulum was used, which was instrumented with a load cell and a data acquisition system. Using this equipment, different load-displacement records were obtained, which were then utilized to determine the dynamic material properties, both for tensile and fracture. The relationship of the stable crack growth associated with the J value was determined using a method developed in CNEA.
This paper summarizes the research carried out for determining the mechanical properties under dynamic conditions of the material from a CANDU type reactor's Pressure Tube. Includes the preparation, prior design and manufacturing of the devices required for testing of tensile and fatigue pre-cracked compact specimens to be tested. To obtain the dynamic properties, an impact pendulum was used, which was instrumented with a load cell and a data acquisition system. Using this equipment, different load-displacement records were obtained, which were then utilized to determine the dynamic material properties, both for tensile and fracture. The relationship of the stable crack growth associated with the J value was determined using a method developed in CNEA.

Descripción

Palabras clave

Citación