Cálculo de activación de una placa MTR irradiada en el RA-10. Dimensionamiento de bulto de traslado
Cargando...
Fecha
Autores
Título de la revista
ISSN de la revista
Título del volumen
Editor
Comisión Nacional de Energía Atómica. Gerencia de Área Académica. Gerencia Instituto de Tecnología Nuclear Dan Beninson
Universidad Nacional San Martin. Instituto de Tecnología Nuclear Dan Beninson
Universidad Nacional San Martin. Instituto de Tecnología Nuclear Dan Beninson
Resumen
El proyecto RA-10 + incluye en sus planes una instalación que permita la caracterización de materiales sometidos a distintas condiciones de irradiación. El “Laboratorio para Estudio de Materiales Irradiados” (LEMI) estará en un edificio contiguo al del reactor, por lo cual las muestras deberán ser transportadas en un dispositivo acorde a su actividad. Los objetivos del presente trabajo son dos; el cálculo de activación de una placa combustible MTR y el dimensionamiento del blindaje necesario para un bulto de transporte a partir de los datos de actividad calculada. Esos resultados serán un aporte para la ingeniería conceptual de la instalación que permitirán verificar los valores de blindaje de diseño de las celdas y diseñar uno o varios dispositivos necesarios para el manejo seguro de bultos de gran porte dentro de la instalación. Para el cálculo se utilizó el software SCALE, puntualmente el módulo ORIGEN, COUPLE MONACO/MAVRIC.
The RA-10+ project includes in its plans a facility for the characterization of materials subjected to different irradiation conditions. The "Laboratorio para el Estudio de Materiales Irradiados" (LEMI) will be located in a building adjacent to the reactor, so the samples will have to be transported in a device according to their activity. This work has two objectives, to calculate the activation of an MTR fuel plate and the dimensioning of the necessary shielding for a transport device derived from the calculated activity. These results will be an input for the conceptual engineering of the facility to verify the design shielding values of the cells and to design one or more devices necessary for the safe handling of large packages within the facility. The calculations were performed using the SCALE software, particularly ORIGEN, COUPLE MONACO/MAVRIC modules.
The RA-10+ project includes in its plans a facility for the characterization of materials subjected to different irradiation conditions. The "Laboratorio para el Estudio de Materiales Irradiados" (LEMI) will be located in a building adjacent to the reactor, so the samples will have to be transported in a device according to their activity. This work has two objectives, to calculate the activation of an MTR fuel plate and the dimensioning of the necessary shielding for a transport device derived from the calculated activity. These results will be an input for the conceptual engineering of the facility to verify the design shielding values of the cells and to design one or more devices necessary for the safe handling of large packages within the facility. The calculations were performed using the SCALE software, particularly ORIGEN, COUPLE MONACO/MAVRIC modules.
